How Much Do Custom Kitchen Cabinets Cost in Miami?

Custom kitchen cabinets in Miami generally cost $15,000 to $45,000 or more installed. Smaller kitchens with straightforward painted cabinetry may start around $8,000 to $15,000, while large kitchens with premium wood, specialty finishes, integrated appliances and a custom island can exceed $50,000.

As an initial planning benchmark, full custom cabinets commonly cost about $500 to $1,500 or more per linear foot installed. However, linear-foot pricing cannot show the complete cost of drawers, tall pantry cabinets, appliance panels, decorative finishes and interior storage accessories. Your final price depends on kitchen size and cabinet quantity, whether construction is stock, semi-custom or custom, the cabinet-box material, door style and finish, the number of drawers and pullouts, island size, hardware quality, demolition and installation, condo delivery restrictions and any plumbing, electrical or layout changes.

Custom kitchen cabinet cost by kitchen size

Kitchen square footage does not determine cabinet cost by itself. A compact kitchen with floor-to-ceiling storage can contain more cabinetry than a larger open kitchen with only one cabinet wall. These ranges are a useful starting point for installed custom cabinetry in Miami.

These are planning ranges, not fixed quotations. A kitchen with drawer bases, pantry towers and appliance panels usually costs more than a kitchen with the same linear footage but simple door cabinets.

Custom cabinets cost per linear foot in Miami

Miami cabinet companies often use linear-foot pricing during preliminary conversations.

A 20-linear-foot custom kitchen could therefore cost roughly $10,000 to $30,000 or more for cabinetry and standard installation. However, two kitchens with 20 linear feet of cabinets can have very different prices: one may contain basic base and wall cabinets with doors, while another adds deep drawer bases, floor-to-ceiling pantry cabinets, an integrated refrigerator, an appliance garage, spice and utensil pullouts, decorative end panels, glass doors, crown molding and a custom range-hood surround. Use cost per linear foot to establish a preliminary budget, not to select the final contractor.

Stock vs semi-custom vs custom cabinet costs

The word custom is sometimes applied too broadly, so before comparing quotations, find out which category each company is actually proposing. Stock cabinets (about $4,000 to $12,000) are manufactured in fixed dimensions, finishes and door styles, are generally least expensive and arrive faster, and suit rentals, straightforward layouts and secondary kitchens, though fixed sizes may require filler strips and limit storage options. Semi-custom cabinets (about $8,000 to $25,000) start with standard sizes but add flexibility in widths, depths, finishes, door styles and storage, and offer a useful balance of price and personalization for many Miami kitchens.

Full custom cabinets (about $15,000 to $45,000 or more) are designed and fabricated for the specific kitchen, with adjustable width, height, depth, finish, door style and interior organization. They are particularly valuable for irregular walls, older Miami homes, small condo kitchens needing maximum storage, floor-to-ceiling cabinetry, unusual appliance dimensions, luxury kitchens, integrated appliance panels, custom islands and furniture-style details. Custom cabinets cost more because the design, engineering, finishing and fabrication are completed for one specific project.

What is and is not included in a cabinet quote

One of the biggest problems with cabinet pricing is that companies do not always include the same services, so a $20,000 proposal can look more expensive than a $16,000 proposal even though the lower quote excludes demolition, installation, finished panels or hardware. A complete proposal should state whether it includes field measurements, kitchen design, drawings or 3D renderings, cabinet boxes, doors and drawer fronts, shelves, drawer boxes, hinges and slides, finished end panels, fillers and scribes, toe kicks, crown and light-rail molding, interior accessories, delivery, removal and disposal of existing cabinets, cabinet and appliance-panel installation, hardware installation, final adjustments, touchups and warranty, along with any allowances and exclusions.

A cabinet price normally does not include the entire kitchen renovation unless the proposal says so. Common exclusions are countertops, backsplash, appliances, the sink and faucet, plumbing, electrical work, drywall repair, painting, flooring, structural changes, permit fees, condo deposits and a temporary kitchen setup. Ask for an itemized estimate before comparing prices, because cabinets installed is not detailed enough to establish what you are buying.

Sample custom cabinet budget for a Miami kitchen

Consider a medium-size Miami kitchen with roughly 20 linear feet of cabinetry and a small island.

This example shows why an advertised cabinet-box price can be much lower than the completed installed cost.

The biggest custom cabinet cost factors

Cabinet quantity drives cost, and tall cabinets and islands add boxes without increasing the wall measurement. Drawers versus doors matters because drawer bases cost more than door cabinets but make cookware easier to reach. Cabinet-box material options include furniture-grade plywood, MDF, particleboard and melamine-faced panels; plywood is often chosen for fastening strength, though high-quality engineered panels can also perform well, so ask about panel thickness, joinery, back-panel construction, edge sealing and warranty rather than the material name alone. Door material ranges from solid wood and veneer to painted MDF, acrylic and laminates, with painted MDF common for smooth contemporary or Shaker doors. Door style affects price, since slab doors cost less than inset doors, raised panels, applied molding, fluted panels or furniture-style detailing.

Finish is a major factor, because factory-applied finishes are more controlled than field painting, and color matching, multi-step staining, glazing, high-gloss polishing, two-tone cabinetry or distressing add labor and time. Hardware such as soft-close concealed hinges, full-extension slides, push-to-open doors, lift-up mechanisms and interior lighting affects daily feel; for quality verification, look for cabinetry tested under the ANSI/KCMA A161.1 program, which covers structural, door, drawer and finish testing including heat and humidity. Storage accessories, integrated appliances and installation conditions round out the list: every pullout adds cost, panel-ready appliances need accurately fabricated panels finalized before fabrication, and out-of-square walls, uneven floors, damaged drywall or limited delivery access all raise installation labor.

Why Miami condos can cost more

The cabinets themselves do not necessarily cost more in a condo, but the surrounding logistics can raise the total. Possible condo-related expenses include building application fees, refundable construction deposits, certificates of insurance, restricted delivery hours, elevator reservations and protection, limited parking or loading access, shorter allowable workdays, additional debris handling, building-specific contractor requirements and association design review. Measure hallways, elevators and unit entrances before approving oversized pantry cabinets or assembled islands, because some pieces may need to be delivered in sections and assembled inside the unit. Condo association approval is separate from any government permit requirement.

What cabinet materials work well in Miami's humidity?

Miami's climate makes moisture management important, but no cabinet material should be expected to withstand an active plumbing leak or prolonged water exposure. Good planning includes properly sealed exposed edges, durable factory-applied finishes, appropriate sink-base protection, correct ventilation, leak detection near sinks and refrigerators, indoor humidity control, prompt repair of plumbing leaks and careful installation around dishwashers. Do not select cabinets based only on a waterproof claim; ask which parts of the cabinet are moisture-resistant and what the warranty excludes. For sink bases, consider a removable waterproof liner or a leak-detection device, which will not prevent a leak but may help identify or contain minor water exposure before it damages the cabinet.

Does cabinet replacement require a permit in Miami?

For properties in unincorporated Miami-Dade County, replacing residential kitchen cabinets in the same configuration is listed as work that does not require a building permit, while associated plumbing, ventilation and electrical work requires a permit when it is relocated, reconfigured or altered. A permit may be required when the project relocates the sink, moves plumbing lines, adds or relocates outlets, changes appliance circuits, moves ventilation, removes or alters walls, changes structural components or creates a substantially different layout. City of Miami properties and properties inside other Miami-Dade municipalities follow their respective building departments' procedures, so always submit the complete project scope when asking whether a permit is required.

How long do custom kitchen cabinets take?

A custom cabinet project generally moves through several stages, and complex finishes, imported hardware, specialty materials and design revisions can extend the timeline.

Do not demolish the existing kitchen based solely on an estimated cabinet delivery date. Confirm that fabrication is complete, delivery is scheduled and any necessary permits or condo approvals are in place.

Custom vs semi-custom: which is worth the cost?

A thoughtful kitchen can combine both approaches: standard-size cabinets where they fit, with custom panels, fillers or specialty pieces solving the difficult areas.

How to reduce cabinet costs without sacrificing quality

Keep the existing layout so the sink and appliances stay in place, which reduces plumbing, electrical, permit and construction expenses. Use custom features selectively, investing where they add measurable value such as an awkward corner, pantry wall or island, and use simpler cabinets in less visible areas. Choose a practical factory finish rather than custom color matching, hand glazing or high-gloss polishing, and limit decorative details like crown molding, fluted panels and glass doors that add fabrication and installation cost. Prioritize durable hinges and drawer slides before low-priority accessories, avoid late design changes that trigger redesign charges and remanufacturing, and compare complete installed prices, because a low cabinet-box price can become expensive after delivery, panels, moldings, accessories and installation are added.

How to compare two cabinet quotes

Create an apples-to-apples comparison before selecting a company by asking each one the same questions: is it stock, semi-custom or full custom; what are the box material and thickness; what is the door material and finish type; how are drawer boxes constructed; which hinge and slide manufacturer is used; are finished panels, moldings, fillers and storage accessories included; are delivery, demolition, disposal, installation and hardware installation included; is permit coordination included; what is the warranty length and coverage; what is the estimated production time; and what are the change-order policy and payment schedule. If a contractor cannot clearly answer these, the proposal may not be detailed enough for an informed decision.

Be cautious when a proposal uses custom without defining the construction method, does not identify cabinet-box materials, omits drawings or a cabinet schedule, requires a large payment without clear production milestones, excludes delivery without a delivery price, does not identify installation responsibility, provides no written warranty, does not account for finished sides or panels, ignores condo delivery restrictions, begins fabrication before appliance specifications are confirmed, or does not explain how change orders are priced. The lowest initial quote is not necessarily the lowest completed cost.

Frequently asked questions